1. Printer Maintenance
Maintenance method | Maintenance frequency |
---|---|
Clean the printer chamber. | Before printing |
2. Maintenance of Hotend
Maintenance method | Maintenance frequency |
---|---|
Examine the extruder, feed filament manually by 3-4cm.If uneven feeding or fracturing feeding are found, please replace the PTFE pipe. | Before printing |
Clean the extruder. Remnant filament affects the accuracy of platform. | Before printing |
3. Maintenance of Extruder
Maintenance method | Maintenance frequency |
---|---|
Examine that if the there is any slag over the extruder gears. | Every 300 working-hour. |
Examine that if the fans are functioning properly. | Before printing |
4. Maintenance of Platform
Maintenance method | Maintenance frequency |
---|---|
Clean the glass plat with wet rag. | Before printing |
Adjust platform. | Every 300 working-hour. |
5. Maintenance of X/Y axis
Maintenance method | Maintenance frequency |
---|---|
Clean the surface of X/Y axis with alcohol when necessary. | Before printing |
Checking if the screws securing the pulleys on the X, Y axis and the pulleys on motor axis are tightened. | Every 300 working-hour. |
Checking if the extruder moves freely when the printer is off. | Every 300 working-hour. |
6. Maintenance of Z axis
Maintenance method | Maintenance frequency |
---|---|
Checking if the Z-axis rails and the screw are clean from material remains. | Before printing |
Checking if the screws and nuts are tightened. | Every 500 working-hour. |
Z-axis rails lubricating. | Before printing |